Home > Install Windows > Problems Reinstalling W8 Using USB Recovery Media

Problems Reinstalling W8 Using USB Recovery Media


An "Error 1002" message displays after backing up files This error can occur during a system recovery when you choose to back up files to an external hard drive. On many PCs, you’ll have to press a key during the boot process to access the recovery tool. A "recovery discs not supported" or "incorrect recovery discs" message displays One or more of the following errors displays when attempting to use user-created or HP-provided recovery discs: This computer is Look for a "Learn how to start fresh with a clean installation of Windows" option at the bottom of the Recovery pane after upgrading to the Anniversary Update. check my blog

A "Windows Setup could not configure Windows to run in this computer hardware" message displays If you replaced a standard hard drive with an Advanced Format (AF) drive, system recovery might This can occur depending on the type and size of the AF drive and with recovery discs created prior to Fall 2010. Due to licensing restrictions, you can create only one HP recovery solution from your computer. Frequently asked questions about creating HP recovery media Why do I get the message, "Recovery disc has been created"? https://www.eightforums.com/installation-setup/73299-problems-reinstalling-w8-using-usb-recovery-media.html

How To Reinstall Windows 8.1 Without Cd

This step will take a few minutes and then the system will reboot again. Turn on the computer and repeatedly press the F11 key, about once every second, until the Choose your keyboard layout screen displays, and then follow these instructions: Click to select the The configuration data on the motherboard or hard drive was not correctly configured at the factory when the computer was manufactured.

Then insert the first recovery disc into the drive. IBM WebSphere Portal Home IBM Logo Sign Up Log In Welcome Getting Started Contact HP - Anonymous Contact HP Product Context View Support Home Test page Product Home Product Warranty Result If recovery does not start or a non-system disk error displays, restart the computer by pressing the power button, and then repeat these steps to select a different CD/DVD drive. How To Reinstall Windows 7 From Recovery Partition Therefore, it is suggested that you create the bootable ...

Also, on rare occasions, this error can occur when data on the hard drive was not configured correctly at the factory. How To Reinstall Windows 7 With Cd To use a USB flash drive to perform a recovery, you must select the USB drive in the Boot Menu upon system startup. For more information, see the HP support document Performing an HP System Recovery (Windows 8). For more information about how to find and update the firmware for your HP or Compaq computer, see the HP support document Downloading or Updating Software and Drivers for HP Computers.

Privacy Policy | Cookies | Ad Choice | Terms of Use | Mobile User Agreement A ZDNet site | Visit other CBS Interactive sites: Select SiteCBS CaresCBS FilmsCBS RadioCBS.comCBS InteractiveCBSNews.comCBSSports.comChowhoundClickerCNETCollege NetworkGameSpotLast.fmMaxPrepsMetacritic.comMoneywatchmySimonRadio.comSearch.comShopper.comShowtimeTech How To Reinstall Windows 7 Without Cd Or Usb If this window displays, select Run program from media, and then click Next. Subscribe In case you are wondering As I mentioned in the introduction, I'm going to cover the use of the Reset your PC tool from the Recovery Drive. Turn off the computer.

How To Reinstall Windows 7 With Cd

If you have any questions about this process, please ask in the Windows 8 Forum. http://en.community.dell.com/support-forums/software-os/f/4677/t/19595706 Immediately press the Escape key repeatedly, about once every second, until the Startup Menu opens. How To Reinstall Windows 8.1 Without Cd Select the keyboard layout you wish to use by left-clicking on it once. How To Reinstall Windows 7 Without Cd Ask the community!

Use the arrow keys to select Boot Menu and then press Enter or press f9 to show the boot menu. click site Click WindowsBackup, right-click the name, then select Disable. On my test system the entire procedure took about an hour to complete. Sorry There was an error emailing this page. How To Reinstall Windows 8 Without Cd

Figure : Troubleshoot screen On the operating system selection screen, click Windows 8.1. The hard disk quick check begins. In fact, when I went to the Windows Activation tool the activation date is the same date on which I originally installed Windows 8. (To access the Windows Activation tool, press news Turn on the computer and remove media from internal drives.

Then press Enter. Reinstall Windows 7 Without Losing Data In the future if you need to use the recovery drive to start Windows, you can insert it into a Windows 8 machine and boot off of it. If you replaced a standard hard drive with an Advanced Format (AF) drive, system recovery might not recognize the drive or partition.

HP Customer Support Support Home Products Software and Drivers Forums Contact Support Search Select your Model Let HP find my products Identify now HP can identify most HP products and recommend

Immediately press the Escape key repeatedly, about once every second, until the Startup Menu opens. You will now be at a screen where you can choose an option to perform. To purchase recovery discs, see the HP support document Looking for HP Recovery Discs or an HP USB Recovery Drive. Clean Install Windows 7 Changing the SATA Mode setting (AHCI, IDE RAID) in the BIOS setup to an alternate setting might resolve the issue.

Look for the build number information on the lower, right corner of the Windows desktop. However, you should know that the Reset your PC tool can also be launched from within Windows. For more information about System Image Recovery, please see this tutorial: How to use System Image Recovery in the Windows 7 and Windows 8 Recovery Environment Automatic Repair Automatic Repair tries More about the author Then insert the first recovery disc into the drive.

Reinsert the disc and try again. Figure : Restore computer verification Follow the on-screen instructions to perform a recovery. If the computer is less than a few years old, then you will likely be able to obtain a recovery solution from HP. This step is important if you received the discs from HP Customer Care through the mail.

While it may have taken just slightly longer to clean the 350MB partition, the end result was the same.) Choosing a cleaning method Once you choose a drive, you'll then see Cannot start recovery when Windows does not start correctly If the first method fails, the most likely cause is that the Recovery Partition is corrupted. Resolving general errors Following the steps in this section might help resolve these errors: Error 0x1002: Cannot extract the archive Error 0x1003: Cannot create a folder Error 0x1004: Cannot copy the HP Customer Support Z7_3054ICK0KGTE30AQO5O3KA30U7 hp-contact-secondary-navigation-portlet Actions ${title} Loading...

Figure : Recovery Manager using user-created recovery discs Recovery discs received from HP support: Select one of the following options, depending on which selection is shown on your screen, and then Starting a recovery from CD or DVD You can start a recovery from recovery discs if you cannot successfully log on to the computer. Most manufacturers don’t include Windows installation discs with their computers.If your computer has a recovery partition, run your manufacturer’s recovery tool to reinstall Windows. Click My Computer.

If so, select one of the CD/DVD selections from the list to see if HP Recovery starts. A "No system partition found" message displays The following error message occurs while using the Recovery Manager: No system partition found. Safe mode prevents non-essential services and software from opening when Windows loads. Systems are only configured to automatically activate the operating system that the system was originally configured with.

Information Fraudulent Callers - protect yourself and report it​ Learn what to do if you are contacted by fraudulent callers posing as HP representatives. If you have already made recovery discs using the Recovery Disc Creation program, be sure to run the recovery from the same drive that you used to create the discs. Remove any recently added internal hardware. How to avoid common PC building mistakes How to install (or replace) a case fan Replace your PC's heart: How to install...

If the disc is scratched, you can try to repair the disc using an optical disc repair kit.