Home > Unable To > Unable To Install A Backup HD From A Old WinXP Computer

Unable To Install A Backup HD From A Old WinXP Computer

D+ Reply Stefen Kaur on November 11, 2008 at 12:50 pm I have a question. Assuming I have an IDE now, can it simply be replaced by a SATA drive or is the motherboard specific to each? Most IDE ribbon cables come with three connectors: one on the end (usually black) and one mid-way (usually gray), then one further away on the other end which connects to the A Repair Installation will remove any service packs later than the ones included in the installation CD. get redirected here

Reply Rivers on August 4, 2007 at 2:07 am I installed a extra hard drive in my pc and would like to completely wipe all data from it. I installed a 160GB hard drive and it appears to have installed correctly. You will be prompted during the first part of setup to partition and format your drive; if you are using Windows 2000, XP or Vista, make sure to use the NTFS Then, to create a new partition, select the unpartitioned space and press C. https://www.eightforums.com/drivers-hardware/20966-unable-install-backup-hd-old-winxp-computer.html

Reply Mark on January 31, 2008 at 2:43 am My old hard drive crashed. At this stage it is not important to screw in your old drive; you can just rest it somewhere convenient, but don't leave it hanging in midair. Click [Start] then [Help and Support] then [Performance and Maintenance] then [Using System Restore to undo changes] then [Run the System Restore Wizard]. Reply Bruce on September 9, 2008 at 11:02 pm I have a gateway computer and I added an extra hard drive to the computer and its not showing up on my

I originally bought my NO NAME computor from him back in December It first went down in March probally from trying to download free music off Kazzaa. So you would put your disc drives on IDE2 and your hard drives on IDE1. PLEASE HLPE Reply Michael on October 24, 2009 at 7:02 pm GREAT THANKS!!!!!!! far from a computer expert I was able to use your information to find the missing step I needed to install my sata 2nd drive.

You will also need to supply the correct Windows licence key for the CD. Press ESC to bypass the repair and install a fresh copy. I believe this is a ATA-6 model. http://www.labhc.com/hardware-drivers-unable-to-install-backup-hd-from-old-winxp-computer/ To display this menu, you need to power off your computer and then restart it.

Thanks Reply Tom on December 20, 2008 at 10:19 pm Without getting involved in a conversation about whether or not myself or anyone else can understand the lingo here…I'm simply attempting If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). by nickddonnelly / July 13, 2008 11:21 AM PDT In reply to: So what question is there? Do I require any jumpers on these drives if I were to hook up 2 SCSI drives together?

This usually means that the version of Windows on the CD does not match the one already installed. The primary drive on a channel is called the Master, and the secondary one is called the Slave. Reply Joshcore on July 30, 2007 at 7:54 pm ^Ryan, this article is aimed at people who already know what jumpers are and the difference between SATA and IDE based hard Remember Me?

Click OK. Get More Info I was trying to set the 2 HDD on IDE1 (Secondary) as Master and slave, and it wouldn't work. I connect the one with the operating system on it to SATA 1, the brnd new SATA drive to SATA 2, ad the IDE converted to SATA to SATA 3. Audit your current PC setup.

It's really easy to install a new hard drive with Windows XP. If you run into any trouble following this guide or installing your hard drive, feel free to join our forums at http://forum.pcmech.com and ask for help, someone will be glad to Since I'm an old geezer and not tech savvy, I need the kind of help you provide. useful reference Don't force it.

It does the same with all three settings. To create a new partition with the maximum amount of space allotted to it, press Enter. I then rebooted to find the BIOS and the machine came up with "Computer needs Repair".

I really appeciate it 😀 Reply malcolm on November 9, 2007 at 6:08 am HiI've got a system with a 40gig drive which i want to ghost to a 250gig drive.

After the first three parts of this tip, your hard drive is now cleansed of its old data, errors, and operating system. Heck, I've even had to go to Wikipedia to understand what SATA is!Great website! The intent was just a secondary drive for extra space. I already have a couple of licensed copies of XP, so I don't need to worry about that.

Ultimately, you might need to buy a new Windows XP installation CD if you want to do a Repair Installation. Change any necessary jumpers (see "Setting Jumpers" above) so that both drives as well as a CD drive are recognized. If you don't know the difference between ide & sata then you need to read up on that before trying to fit a new disk drive or you'll end up buyiing this page Do a quick format if asked.6.

How do i remove this data? PLEASE?!? So now the data connects by SATA instead of IDE. With both drives set to Cable Select, the computer will recognize the drive hooked up to the black end connector as the master and the one hooked up to the middle

Very helpful!! Most cables are keyed to the connector so they only go in one way; if the cable isn't going in, try flipping it over. In addition, would this OS partition function in a similar way that my HP recovery drive does, or would I need to rely on reinstalling the OS from the CD if Are you connected to the internet?

Read the partition posts, and figure I would need to "ghost" the OS, or would a clean install be better and ghost the rest of the programs? Get a sandwich. Other versions of Windows will get you straight to the Windows desktop. I needed to replace the one that crashed a couple of weeks ago, but I thought it would be too hard a job until I found your site.

Her semi-weekly feature, Geek to Live, appears every Wednesday and Friday on Lifehacker. Very helpful!!